FLAME RETARDANT FABRICS FOR ZINC FOUNDRIES

flame retardant protective fabric for zinc foundry

The viscosity of zinc in liquid state makes it difficult to prevent burns it causes.

The melting point of zinc is 420 °C. Therefore, its viscosity in liquid state is very high (even more so than that of aluminium). Consequently, when it splashes, it is one of the most difficult metals to protect workers from.

This metal and its alloys —nickel, by and large— present a high risk, adhering to practically any sort of fabric. In the event a splash adheres to fabric, the transfer of heat to a worker’s skin is lower, though not less dangerous, than with aluminum.

The Marina Textil solution is an exclusive fabric developed with only this sort of risk in mind. These flame retardant fabrics for zinc foundries have also been developed for protection from other risks that may arise in these foundries, though less frequent: convective heat, electric arc and liquid chemical splashes.

The weight of this textile solution will depend on the type of factory, foundry, or galvanizer, and the level of automation of said factory, foundry or galvanizer.

These are the flame retardant fabrics that Marina Textil has developed for zinc foundries. Click on any of them to find out more about their specifications.

STANDARDS THAT MUST BE MET BY PROTECTIVE FABRICS FOR ZINC FOUNDRIES

If you have any questions, please contact our technical department experts.